This PM1228VF-LB is no exception. Operates on 110V Power, No special wiring needed.
Brushless DC Motor, Variable Speed. Quick Change Gear Box, Many less change gears than other machines in this size. INCH LEADSCREW AND FEED SCREWS for even, easy measurements. POWER CROSS FEED, BOTH IN, OUT, and LEFT and RIGHT, and WILL CUT LEFT HAND THREADS TOO. Super Smooth and Quiet running machine.Heavy Duty Bed Width (same width as most 12x36 Machines). Variable Spindle Speeds From 50-2000 rpm. This sale goes way beyond the stock machine, with a number of important add-ons and upgrades, all included.
High quality Husky rolling workbench with ball-bearing drawers, locking wheels and hardwood top (shown). This lathe is easy to move, locks in place! Trav-A-Dial on the carriage, gives accurate position readout.
Custom designed holder makes it easy to engage/disengage. Quick-change toolpost with tool holders.Live center and keyless chuck for tail stock. Assorted cutting tools, including cut-off tool and carbide insert tools. Everything lathe-related that is shown in the photos (too numerous to list). Extra bonus: assorted high-speed-steel cutting bits and blanks, ready to shape, sharpen and use.
The ways have ALWAYS been properly oiled and protected, the gearbox has the right amount of the right oil, and I've added a rubber mat to the places where a tool-drop could damage the paint. This exceptional tool is ready to MAKE CHIPS in your shop.
Of course, everything works, it's as-new. My loss is your gain. I have a bad back.Easy access on paved driveway, ground level shop. Note: This is a quality metal lathe, not a toy nor low-end hobby machine. Please be aware that proper safety measures should always be taken to avoid harm to person, machine or parts. If you are NOT familiar with using a tool such as this, here's your chance to learn on a like-new full-sized lathe that has the strength and precision to do quality work. Frank Hoose (no relation) has created a great series of videos on YouTube that evaluate this model very thoroughly.
Here's a link to the first installment. I practice safe distancing, cleansing and mask wearing. Here are the basic specs from Precision Matthews. Swing over cross slide 7.
Spindle Center Line Distance from Floor Approx. Spindle Chuck Mount D1-4, Camlock. Spindle Face to Tail Stock Spindle Face Max Distance 30. Spindle Taper, Internal MT #5. Lead Screw Diameter / Pitch 3/4 / 8 TPI.Inch Thread Cutting Range 5-72 TPI, 27 Different Threads 5,6,7,8,9,10,11,12,13,14,16,18,19,20,22,24,26,28,32,36,40,44,48,52,56,64,72. Longitudinal Feed Range (Left and Right). 0015.0159 Inches Per Revolution. Cross Feed Range (In and Out). 001.010 Inches Per Revolution. Spindle Length through headstock, Protruding End to D1-4 Chuck Mounting face Approx. Spindle Length through headstock, Protruding End to 3 Jaw Chuck face Approx. Max Carriage Travel, Along Bed Ways 24. Tail Stock Quill Diameter / Travel 1-1/4 / 4.
Tail Stock Quill Taper MT #3. Main Motor Horsepower / Type 1.5HP / DC BRUSHLESS High Torque.
Voltage / Phase/ Amps 120 Volts, 11 Amps. Dimensions, Assembled (Includes cross slide handles) 49H x 26W x 59-1/4L.
Foot Print (without Handles Included) 60L x 21 Front of chip pan to back of splash guard. Approximate Machine Weight Machine only, 490 Lbs, With Stand, 600 Lbs.The item "Precision Matthews PM-1228VF-LB Lathe, Mint, many extras" is in sale since Monday, November 9, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes". The seller is "deal-finder" and is located in Weaverville, North Carolina. This item can't be shipped, the buyer must pick up the item.